Basic Info.
Model NO.
SF2000, SF4000, SF6000, SF8000
Flow Rate ( Litres )
2 ~ 8
Power Supply(AC)
220/110V 50/60Hz
Max Power Consumption (W)
700 ~ 2300
Water Tank Capacity (L)
8
Water Consumption (ML/HR)
120 ~ 480
Dimensions(CM) (H*W*D)
57*39*55
Transport Package
Wooden Case
Specification
57 * 39 * 55 cm
Product Description
Sino-British CooperationA NEW......SAFE FLAMEFROM WATERA NEW GENERATION DEVICE THAT WILL MODERNISE THE TRADITINAL METHODS OF OXY-ACETYLENE AND GAS-AIR BRAZING.A new generation device that will modernise the traditional methods of oxy-acetylene and gas-air brazing.Safeflame is the development of a "Safer and better brazing flame" using Hydrogen and Oxygen from Electrolysis of de-ionised water needing only water and electricity and no chemicals.The safeflame project is the result of EU funded research project (1.8 million Euro) from 1st November 2011 to 31st October 2014.Safeflame (UK) Ltd. Was the company set up to exploit the project results on behalf of the SME AG which is made up of EABS ( European Association of Brazing and Soldering), CESOL ( Spanish Welding Association), BESA (Building Engineering Service Association).Safeflame Hydrogen Brazing Machine was designed and manufactured on the base of Sino-British Cooperation and launched into market in 2019.What's NEW?NEW Safeflame torch design producing a new "FLAME" (Very different from the traditional gas/air or gas/oxy FLAMES)Safeflame® torches linked to ELECTROLYSERS with SEPARATE streams of HYDROGEN and OXYGEN gases. Dominant "Joining process" is FLAME BRAZING.Why is it SAFER?NO premixed gases,NO gas cylinders,NO light back,NO corrosive chemicals.From WATERThis "new" safeflame compliments rather than competes with existing commercially available flame. It's a "new" additional flame now available to the market.NOT to be confused with flames from electrolysis of water (mixed gas) which uses corrosive chemicals.Fuel Gases for FlamesWhere & who do we get existing fuel gases from ...WHY has hydrogen generally been the last choice for fuel gas ?* Low CV (Calorific Value) 330btu/cf, Natural Gas 1000btu/cf, propane 2500 btu/cf, Acetylene 1300 btu/cf* Perceived safety issues, particularly with Oxygen and light back* Safety issues with chemicals from existing HHO flames from water (mixed gases)* Inconvenience of supply from cylinders for both hydrogen and oxygen* Lack of real knowledge and experience in the supply chain compared to other fuel gases.Gas Utility... Natural gas (Methane)Industrial gas company Liquefied Petroleum Gas (LPG) (Propane/Butane/Propylene) Acetylene Hydrogen Reformed Natural gas Electrolysis of water Requirements for combustion: Gas + Oxygen = FLAMEWhere does Oxygen come from ?* Air (20% Oxygen / 80% Nitrogen)* Oxygen from a cylinder, generator * Mixed Gas or Separate Gases (Electrolysis of water)Why choose Hydrogen and Oxgen now ?* Recent developments with Electrolysis (separate gases) have reduced electrolyser costs so hydrogen and oxygen can now be conveniently sourced from water* New Safeflame®burner designs produce a new flame with no lightback, less intense, controllable and safer.* So, for the first time unique benefits of hydrogen and oxygen can now be used safely from a convenient source of supply.* Flame brazing is used in ALL industries including Automotive, Aerospace, HVACR and Heat pumps and many more sectors.* Manual and automated methods* HVACR and heat pumps is a huge global industry.* Dominant "Joining process" is FLAME BRAZING* Manually flame brazing holding a gas/oxygen hand torchTypes of ElectrolysisRange of Commercially available electrolysersSafeflame uses PEM cell:* Separate gases have two separate outlet connections for Hydrogen and Oxygen.* Acidic (PEM) with no KOH but uses built-in catalyst Others use HHO Cell:• HHO mixed gas has one outlet connection. • Hydrogen and oxygen gas immediately mix together • Alkaline type with KOH (electrolyte) Mixed Gas Called HHOTWO BASIC burner DESIGNS Pre-Mixed & Post-MixedPre-Mixed: An "unpiloted" single-orifice Gas-Oxygen Burner nozzle. HHO machines use this kind of pre-mixed burner nozzle.Post-Mixed Multi-orifices Burner Nozzle, our Hydrogen Brazing Machine use this kind of post-mixed burner nozzle.Dominant "Joining process" is FLAME BRAZINGRange of Burners and Torches Single and Double Safeflame Torches Various sizes of Safeflame burner nozzles are available. Size range - The higher the number the smaller the port size. Burners and torches can be designed according to customers' requirements.NO Compressed gases or mainsNO corrosive chemicals required Health and Safety * The system eliminates the usage of Compressed gas cylinders and reduces the possibility of gas cylinder explosion.* The Hydrogen flame is environmentally friendly. The combustion of Hydrogen and Oxygen produces water vapor and does not produces CO2 emissions, resulting in a better working environment for the brazing operators.• The gas pressure inside the Electrolyser is very low (< 0.5 bar) which is below any safety regulation for high pressure vessels . • No hydrogen and oxygen gases storage ; machine produces the hydrogen and oxygen gases on demand. • Brazing does not require the operator to wear any special glasses. • The fumes are reduced by about 60-70%Quality. The flame is neutral and concentrated; heat is therefore localised and does not spread, eliminating the risk to overheat the brazing piece and nearby assembly components. Such a flame drastically reduces the oxidation inside the brazed pipes. For the refrigeration/air-conditioning industry with less oxidation inside the copper tubing will result in extended life-time of the compressor.• Thanks to the neutral flame and high temperature the brazing alloy penetrates deeper into the joint producing stronger connections. • The Hydrogen and Oxygen gases from the electrolyser are mixed automatically at the tip of the torch thus eliminating the human intervention, the flame's quality is always consistent therefore quality of brazing improves.Technical Parameters| Model | SF2000 | SF4000 | SF6000 | SF8000 | SF1000 | SF12000 |
| Flow Rate ( Litres ) | 2 | 4 | 6 | 8 | 10 | 12 |
| H2 Output (LPM) | 2 | 4 | 6 | 8 | 10 | 12 |
| O2 Output (LPM) | 1 | 2 | 3 | 4 | 5 | 6 |
| Power Supply(AC) | 220/110V 50/60Hz | 220/110V 50/60Hz | 220/110V 50/60Hz | 220/110V
50/60Hz | 220/110V
50/60Hz | 220/110V
50/60Hz |
| Max Power Consumption (W) | 700 | 1300 | 1800 | 2300 | 2800 | 3300 |
| Water Tank Capacity (L) | 8 | 8 | 8 | 8 | 20 | 20 |
| Water Consumption (ML/HR) | 120 | 240 | 360 | 480 | 600 | 720 |
| Dimensions(CM) (H*W*D) | 57*39*55 | 57*39*55 | 57*39*55 | 57*39*55 | 70*50*78 | 70*50*78 |
| Weight (KG) | 35 | 38 | 40 | 42 | 90 | 100 |
Address:
No. 554 Zhengfeng Road, Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
In response to the requirements of customers and the needs of the market, the Oxygen Hydrogen Brazing Machine was jointly developed, designed and produced by Jinan Green Lab Instrument Co., Ltd. And Safeflame (UK) Limited in 2016, and was launched into market in 2019.
The core part of Oxygen Hydrogen Brazing Machine is PEM (Proton Exchange Membrane) hydrogen cell and membrane is imported from DuPont, US. The hydrogen relative products here we have are including Oxygen Hydrogen Brazing Machine, Pure Hydrogen Engine Cleaning Machine, Hydrogen Generator and Hydrogen Inhalation Machine. And these products only need pure water and electricity, no need to add KOH or any other chemical substances, absolutely environment-friendly. Hydrogen Generator was our first product, which has been managed since 1985, with a history more than 35 years. We have imported our products to more than 20 countries including US, UK, Germany, Greece, Norway, Australia, Columbia, Singapore, India, Israel, Turkey and so on.
){kind=link}